18 Years Factory Bender - 1250E Pneumatic Electromagnetic Bending Folding Machine With – JINDONGCHENG

Short Description:

Product Detail

Product Tags

Feedback (2)

Our solutions are widely regarded and trustworthy by consumers and may meet continually modifying financial and social requirements for Homemade Press Brake , Folding Bender Machine , Tennsmith Finger Brake , We have experienced manufacturing facilities with more than 100 employees. So we can guarantee short lead time and quality assurance.

18 Years Factory Bender - 1250E Pneumatic Electromagnetic Bending Folding Machine With – JINDONGCHENG Detail:

JDC BEND™ 1250E DOUBLE E-TYPE MAGNET BODY Powered 1250mm x 2.0mm Electromagnetic Sheet Metal Folding Machine
Product image is only a representation, actual product appearance may differ slightly
JDC 1250E DOUBLE E-TYPE MAGNET BODY Powered High performance electromagnetic sheet metal folder Specifications
Nominal capacity	1250 mm x 2.0 mm (4ft x 15g)
Nominal capacity	48” (4-foot) length with a maximum capacity of 15 gauge mild steel.
Clamping force (with standard full-length clampbar)	12Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
Recommended for	HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more.
Eletrical Supply:	1Phase & Pneumatic air supply, 220/240 V ac and will work at virtually any site.
Nominal current:	15Amp
Duty cycle:	30%
Box Depth	Unlimited
Bend Angle	0-180°
Max. Clamping Bar Lift	Unlimited
Max. Capacity with Extension	16ga stainless steel
Max. Capacity without Extension	15ga stainless steel
Thermal Cut-Out	158°F (70°C)
Shipping dimensions	1.41m x 0.95m x 1.1m = 1.6m3
GW/NW	300/280kg
Blade gap adjustment	Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.
adjustable back gauges	Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control	lets you deliver repeatable bends time after time.
Notes	Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.
Easy operation	1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend.
open-ended design	1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn’t reliant on conventional finger depths.
Standard accessories	include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars.
Optional accessories	available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly
Special tooling	Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling
Operator Safety	Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)
MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	2.0mm	30 mm*	3.5 mm
	1.6 mm	15 mm	2.2 mm
	1.4mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	2.2 mm	30 mm*	1.8 mm
	1.7 mm	15 mm	1.2 mm
	1.5 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.4 mm	30 mm*	3.5 mm
	1.1 mm	15 mm	3.0 mm
	0.9mm	10 mm	1.8 mm
With standard bending-beam extension fitted
For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.
1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com
specifications subject to change without notice.
Every JDC BEND modle have in stock , We can arrange shipping to you ASAP

Advantages

No limitation to depth of boxes.
Can form deep channels, and completely closed sections.
Automatic clamping and unclamping means faster operation, less fatigue.
Accurate and continuous indication of beam angle.
Quick and accurate setting of angle stop.
Infinite length bending in stages is possible.
Open ended design allows folding of complex shapes.
Machines can be ganged end-to-end for long bending.
Adapts easily to customised tooling (clamp bars of special cross-sections).

Product detail pictures:

Related Product Guide:
What a Tesla sees: 360 degree video reveals exactly how Elon Musk’s electric car navigates the world | 48 Box And Pan Brake
Brake Corrosion Science: Why Rust On Brake Lines And Pads Is Not Normal | Brake Sheet Metal

Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for 18 Years Factory Bender - 1250E Pneumatic Electromagnetic Bending Folding Machine With – JINDONGCHENG , The product will supply to all over the world, such as: Puerto Rico , Bangladesh , Ecuador , We have now a good reputation for stable quality goods, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!

48 Box And Pan Brake

Electra Brake Manual Folder Price

Plate Bending Machine

Press Brake

Press Brake Bending Machine

Sheet Metal Tools

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.

By Dawn from Serbia - 2016.08.15 12:36

The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!

By Jamie from Montreal - 2016.02.14 13:19

Write your message here and send it to us