High Quality for Aluminium Press Brake - Manual metal sheet plate bending machine plate bender hand press brake small machinery – JINDONGCHENG
High Quality for Aluminium Press Brake - Manual metal sheet plate bending machine plate bender hand press brake small machinery – JINDONGCHENG Detail:
| JDC BEND™ 650E Magnetic sheet metal brake | |||
| Product image is only a representation, actual product appearance may differ slightly | |||
| JDC 1250E High performance electromagnetic sheet metal folder Specifications | |||
| Nominal capacity | 650 mm x 1.6 mm (2ft x 16g) | ||
| 25.5”(2-foot) length with a maximum capacity of 16 gauge mild steel. | |||
| Clamping force (with standard full-length clampbar) | 3Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake. | ||
| Recommended for | HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more. |
||
| Eletrical Supply: | 1 phase, 220/240 V ac and will work at virtually any site. | ||
| Nominal current: | 8 Amp | ||
| Duty cycle: | 30% | ||
| Box Depth | Unlimited | ||
| Bend Angle | 0-180° | ||
| Max. Clamping Bar Lift | Unlimited | ||
| Max. Capacity with Extension | 18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel | ||
| Max. Capacity without Extension | 16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel | ||
| Thermal Cut-Out | 158°F (70°C) | ||
| Shipping dimensions | 0.88m x 0.38m x 0.32m = 0.1m3 | ||
| GW/NW | 86kg/72kg | ||
| Blade gap adjustment | Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses. | ||
| adjustable back gauges | Comes with product supports and adjustable back gauges for production runs. | ||
| Scaled stroke angle control | lets you deliver repeatable bends time after time. | ||
| Notes | Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On. | ||
| Easy operation | 1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend. |
||
| open-ended design | 1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn’t reliant on conventional finger depths. | ||
| Standard accessories | include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars. | ||
| Optional accessories | available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly | ||
| Special tooling | Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling | ||
| Operator Safety | Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs. | ||
| JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR) | |||
| MATERIAL (yield/ult. stress) | THICKNESS | LIP WIDTH (minimum) | BEND RADIUS (typical) |
| Mild Steel (250/320 MPa) |
1.6 mm | 30 mm* | 3.5 mm |
| 1.2 mm | 15 mm | 2.2 mm | |
| 1.0 mm | 10 mm | 1.5 mm | |
| Aluminium Grade 5005 H34 (140.160 MPa) |
1.6 mm | 30 mm* | 1.8 mm |
| 1.2 mm | 15 mm | 1.2 mm | |
| 1.0 mm | 10 mm | 1.0 mm | |
| Stainless Steel Grades 304, 316 (210/600 MPa) |
1.0 mm | 30 mm* | 3.5 mm |
| 0.9 mm | 15 mm | 3.0 mm | |
| 0.8 mm | 10 mm | 1.8 mm | |
| With standard bending-beam extension fitted | |||
| For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above. | |||
| 1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com | |||
| specifications subject to change without notice. | |||
| Every JDC BEND modle have in stock , We can arrange shipping to you ASAP | |||
Product detail pictures:
Related Product Guide:
Vincent Troncoso’s 1966 Chevy C10 | Portable Siding Brake
Trump administration rolled back rules after miscalculating benefits of better brakes on oil trains | Baileigh Tools
Our mission will be to become an innovative supplier of high-tech digital and communication devices by furnishing benefit added structure, world-class manufacturing, and service capabilities for High Quality for Aluminium Press Brake - Manual metal sheet plate bending machine plate bender hand press brake small machinery – JINDONGCHENG , The product will supply to all over the world, such as: United States , Guyana , Chile , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Zoe
from Lahore
- 2016.07.07 13:00
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Hilda
from US
- 2016.09.22 11:32
Write your message here and send it to us
