Factory wholesale Metal Forming Machinery - 3200E Magnetic sheet metal brake – JINDONGCHENG

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for Manual Iron Bender , Sheet Metal Manual Tools , Manual Press , To learn more about what we can easily do in your case, make contact with us at any time. We glance forward to developing superior and long-term organization interactions along with you.
Factory wholesale Metal Forming Machinery - 3200E Magnetic sheet metal brake – JINDONGCHENG Detail:

JDC BEND™ 3200E Magnetic sheet metal brake

Product image is only a representation, actual product appearance may differ slightly

JDC 3200E High performance electromagnetic sheet metal folder Specifications

Nominal capacity 3200 mm x 1.6 mm (10ft x 18g)
127” (10-foot) length with a maximum capacity of 18 gauge mild steel.
Clamping force (with standard full-length clampbar) 10 Tons  is consistent across the entire beam, allowing for crisp bends even in the
middle of the brake.
Recommended for HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication
shops.

Making enclosed boxes, triangles, alternate bends on varying planes, and round
items such as scrolling applications.

Bending a variety of materials, including sheets of mild steel, stainless steel,
aluminum, coated materials, heated plastics,and more.
Eletrical Supply: 1 phase, 220/240 V ac and will work at virtually any site.
Nominal current: 15Amp
Duty cycle: 30%
Box Depth Unlimited
Bend Angle 0-180°
Max. Clamping Bar Lift Unlimited
Max. Capacity with Extension 18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension 16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out 158°F (70°C)
Shipping dimensions  3.4m x 0.38m x 0.32m = 0.4m3 
GW/NW 450kg/380kg
Blade gap adjustment Blade gap adjustment on the clamping bars lets you work with sheet metal of
different thicknesses.
adjustable back gauges Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control lets you deliver repeatable bends time after time.
Notes Capacities can change depending on set up leaf extension. Rule of thumb for
mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner,
extension On.
Easy operation 1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps your
fingers safely out of the machine and you to reposition the material.

4. Lift the the bottom bending leaf to complete the bend and repositioned ready
for another bend.
open-ended design 1. allows you to create fully enclosed ducts and shapes impossible to make with
a traditional box and pan brake.
2. JDC BEND electromagnetic sheet metal brake
can bend boxes or pans to

almost any depth,since it isn’t reliant on conventional finger depths.
Standard accessories include a storage tray, adjustable backstops, A full-length clamp-bar,and a
complete set of short-length clamp-bars.
Optional accessories  available for these models include a narrow clampbar, a slotted clampbar for
forming shallow boxes more quickly
Special tooling  Special tooling can be quickly improvised from pieces of steel to help fold-up
difficult shapes, and for production work the standard clampbars can be replaced
by specialised tooling
Operator Safety Operator Safety is enhanced by a two-handed electrical interlock that ensures
a safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress) THICKNESS LIP WIDTH (minimum) BEND RADIUS (typical)
Mild Steel
(250/320 MPa)
1.6 mm 30 mm* 3.5 mm
1.2 mm 15 mm 2.2 mm
1.0 mm 10 mm 1.5 mm
Aluminium
Grade 5005 H34
(140.160 MPa)
1.6 mm 30 mm* 1.8 mm
1.2 mm 15 mm 1.2 mm
1.0 mm 10 mm 1.0 mm
Stainless Steel
Grades 304, 316
(210/600 MPa)
1.0 mm 30 mm* 3.5 mm
0.9 mm 15 mm 3.0 mm
0.8 mm 10 mm 1.8 mm

With standard bending-beam extension fitted

For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.

1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com

specifications subject to change without notice.

Every JDC BEND modle have in stock , We can arrange shipping  to you ASAP 


Product detail pictures:

Factory wholesale Metal Forming Machinery -
 3200E Magnetic sheet metal brake – JINDONGCHENG detail pictures

Factory wholesale Metal Forming Machinery -
 3200E Magnetic sheet metal brake – JINDONGCHENG detail pictures


Related Product Guide:
Metal Stamping Market in Machinery and Equipment sector Expected To Grow At A CAGR of 4.92% For The Period 2018-2023 | 48 Box And Pan Brake
Review: Oxford Ultratorch Slimline R50 Rear LED | Baileigh Tools

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Factory wholesale Metal Forming Machinery - 3200E Magnetic sheet metal brake – JINDONGCHENG , The product will supply to all over the world, such as: Swiss , Pretoria , Suriname , With the advanced workshop, professional design team and strict quality control system, based on mid- to high-end marked as our marketing positioning, our products are fast selling onto European and American markets with our own brands such as below Deniya, Qingsiya and Yisilanya.
  • A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
    5 Stars By Diana from Zimbabwe - 2015.06.28 19:27
    The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Leona from Vietnam - 2015.10.09 19:07
    Write your message here and send it to us
    WhatsApp Online Chat !