China China wholesale Metal Bending - 1250E Magnetic sheet metal brake – JINDONGCHENG Manufacturer and Supplier

China wholesale Metal Bending - 1250E Magnetic sheet metal brake – JINDONGCHENG

Short Description:

Product Detail

Product Tags

Feedback (2)

We're committed to furnishing easy,time-saving and money-saving one-stop purchasing support of consumer for Metal Bender Press , Manual Metal Bending Tools , Manual Sheet Metal Folding Machine , We are devoted to provide professional purification technology and solutions for you!

China wholesale Metal Bending - 1250E Magnetic sheet metal brake – JINDONGCHENG Detail:

JDC BEND™ 1250E Magnetic sheet metal brake

Product image is only a representation, actual product appearance may differ slightly

JDC 1250E High performance electromagnetic sheet metal folder Specifications

Nominal capacity	1250 mm x 1.6 mm (4ft x 16g)15 to 635 mm
Nominal capacity	48” (4-foot) length with a maximum capacity of 16 gauge mild steel.
Clamping force (with standard full-length clampbar)	6 Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
Recommended for	HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more.
Eletrical Supply:	1 phase, 220/240 V ac and will work at virtually any site.
Nominal current:	8 Amp
Duty cycle:	30%
Box Depth	Unlimited
Bend Angle	0-180°
Max. Clamping Bar Lift	Unlimited
Max. Capacity with Extension	18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension	16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out	158°F (70°C)
Shipping dimensions	1.41m x 0.38m x 0.32m = 0.17m3
GW/NW	180/150kg
Blade gap adjustment	Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.
adjustable back gauges	Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control	lets you deliver repeatable bends time after time.
Notes	Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.
Easy operation	1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend.
open-ended design	1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn’t reliant on conventional finger depths.
Standard accessories	include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars.
Optional accessories	available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly
Special tooling	Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling
Operator Safety	Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

With standard bending-beam extension fitted

For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.

1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com

specifications subject to change without notice.

Every JDC BEND modle have in stock , We can arrange shipping to you ASAP

Product detail pictures:

Related Product Guide:
Honda Will Sell You a Turnkey Civic Type R TCR Race Car | 48 Box And Pan Brake
The 10 Best Cars, One Cool Concept and One Groovy Beach Buggy At The 2019 New York Auto Show | 48 Box And Pan Brake

We have now a specialist, efficiency staff to provide good quality company for our consumer. We normally follow the tenet of customer-oriented, details-focused for China wholesale Metal Bending - 1250E Magnetic sheet metal brake – JINDONGCHENG , The product will supply to all over the world, such as: Singapore , Morocco , Moscow , Being guided by customer demands, aiming at improving the efficiency and quality of customer service, we constantly improve goods and give more detailed services. We sincerely welcome friends to negotiate business and start cooperation with us. We hope to join hands with friends in different industries to create a brilliant future.

Box And Pan Brake Machine

Brake Bender

Harbor Freight Pan And Box Brake

Metal Brake With Stand

Power Magnetic Sheet Metal Brake

Steel Sheet Bending Machine

The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.