China Renewable Design for Cnc Bender - 320E Magnetic sheet metal brake JDC BEND 320E – JINDONGCHENG Manufacturer and Supplier

Renewable Design for Cnc Bender - 320E Magnetic sheet metal brake JDC BEND 320E – JINDONGCHENG

Short Description:

Product Detail

Product Tags

Feedback (2)

Our primary objective is usually to offer our shoppers a serious and responsible small business relationship, offering personalized attention to all of them for Sheet Metal Box Brake , Magnetic Pan Brake , 1250 Magnetic Sheet Metal Brake , We have been in operation for more than 10 years. We are dedicated to quality products and consumer support. We invite you to visit our company for a personalized tour and advanced business guidance.

Renewable Design for Cnc Bender - 320E Magnetic sheet metal brake JDC BEND 320E – JINDONGCHENG Detail:

JDC BEND™ 320E Magnetic sheet metal brake Product image is only a representation, actual product appearance may differ slightly

JDC 320E High performance electromagnetic sheet metal folder Specifications

Nominal capacity

320 mm x 1.6 mm

12.5” (1-foot) length with a maximum capacity of 16 gauge mild steel.

Clamping force (with standard full-length clampbar)

3Tons is consistent across the entire beam, allowing for crisp bends even in the middle
of the brake.

Recommended for

HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops.
Making enclosed boxes, triangles, alternate bends on varying planes, and round items such
as scrolling applications.
Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum,
coated materials, heated plastics,and more.

Eletrical Supply:

1 phase, 220/240 V ac and will work at virtually any site.

Nominal current:

8 Amp

Duty cycle:

30%

Box Depth

Unlimited

Bend Angle

0-180°

Max. Clamping Bar Lift

Unlimited

Max. Capacity with Extension

18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel

Max. Capacity without Extension

16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel

Thermal Cut-Out

158°F (70°C)

Shipping dimensions

0.55m x 0.31m x 0.28m = 0.05m3

GW/NW

50/45kg

Blade gap adjustment

Blade gap adjustment on the clamping bars lets you work with sheet metal of different
thicknesses.

adjustable back gauges

Comes with product supports and adjustable back gauges for production runs.

Scaled stroke angle control

lets you deliver repeatable bends time after time.

Notes

Capacities can change depending on set up leaf extension. Rule of thumb for mild steel,
16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.

Easy operation

1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers
safely out of the machine and you to reposition the material.
4. Lift the the bottom bending leaf to complete the bend and repositioned ready for
another bend.

open-ended design

1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake.

2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any
depth,since it isn’t reliant on conventional finger depths.

Standard accessories

include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set
of short-length clamp-bars.

Optional accessories

available for these models include a narrow clampbar, a slotted clampbar for forming
shallow boxes more quickly

Special tooling

Special tooling can be quickly improvised from pieces of steel to help fold-up difficult
shapes, and for production work the standard clampbars can be replaced by specialised
tooling

Operator Safety

Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe
pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

With standard bending-beam extension fitted
For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.
1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com
specifications subject to change without notice.
Every JDC BEND modle have in stock , We can arrange shipping to you ASAP

Product detail pictures:

Related Product Guide:
Cyclists sue Metrolink after coming off their bikes on tramlines | Clamping Box Brake
Buying a Table Saw? Read this Guide First! | Brake Sheet Metal

Our enterprise since its inception, usually regards product top quality as business life, repeatedly enhance manufacturing technology, make improvements to product excellent and continuously strengthen enterprise total high quality administration, in strict accordance with all the national standard ISO 9001:2000 for Renewable Design for Cnc Bender - 320E Magnetic sheet metal brake JDC BEND 320E – JINDONGCHENG , The product will supply to all over the world, such as: Slovakia , Atlanta , Sydney , our qualify products have good reputation from the world as its most competive price and our most advantage of after-sale service to the clients.we hope we can provide a safe, environmental products and super service to our clients from all of the world and establish strategic partnership with them by our professional standards and unremitting efforts.

Bending And Folding Machine