Advantages

1. No limitation to depth of boxes.
2. Can form deep channels, and completely closed sections.
3. Automatic clamping and unclamping means faster operation, less fatigue.
4. Accurate and continuous indication of beam angle.
5. Quick and accurate setting of angle stop.
6. Infinite length bending in stages is possible.
7. Open ended design allows folding of complex shapes.
8. Machines can be ganged end-to-end for long bending.
9. Adapts easily to customised tooling (clamp bars of special cross-sections).
   

   Parameters
   MODEL	650E	1000E	1250E	2000E	2500E	3200E
   Max capcity ( mm )	625 X 1.6	1000 X 1.6	1250 X 1.6	2000 X 1.6	2500 X 1.6	3200 X 1.2
   Length x thickness（ga）	2′ X 16	3′ X 16	4′ X 16	6′ X 16	8′ X 16	10′ 18
   Clamping force ( ton )	3	4.5	6	9	12	10
   Duty cycle	30%	30%	30%	30%	30%	30%
   Back gauge ( mm )	390	640	640	640	650	640
   Nominal current ( Amp )	4	6	8	12	15	15
   Bending-edge length ( mm )	670	1050	1300	2090	2590	3290
   Distance between lifters ( mm)	630	1010	1260	2028	2528	3228
   Foot switch	Standard	Standard	Standard	Standard	Standard	Standard
   Packing size ( cm )	90X30X35	120X30X35	140X110X35	220X110X35	270X110X35	340X110X35
   N.W. / G.W. ( KG )	102/127	142/177	175/220	290/220	330/420	400/510