A liberty-loving, sensible, God-fearing options trader by day…Adam Spafford is known for his quick wit, easygoing demeanor, and readiness to lend a hand when called upon.

In Europe, the build rates increased in the quarter, but the outlook for the year have more or less been on the same level as it were a quarter ago.

Question: Why is a press brake called a press brake? Why not a sheet metal bender or a metal former? Does it have to do with the old flywheel on mechanical brakes? The flywheel had a brake, like that on a car, allowing me to stop the motion of the ram before the forming of the sheet or plate began, or to slow the ram’s speed during forming. A press brake amounted to a press with a brake on it. I’ve had the privilege of spending a few years with one, and for many years I thought that was why the machine’s name is what it is, but I’m not sure that’s correct. It certainly doesn’t sound right, considering the word “brake” has been used to describe sheet metal bending long before powered machines came along. And press break can’t be correct, because nothing is broken or shattered.

India, it’s another market, which have a softer outlook. It’s a market around 260,000 vehicles built. And it’s slightly down, not much, but slightly down from our outlook for the full year also when we reported quarter 4.

If I find a good dealer I use them I find a bad I do not go back. It amazes me how often people find bad dealers and just keep going back?

And we continue to communicate the target here of reaching 10% in ’22, excluding the investments in new technologies.

All that welding had previously led to excessive heat buildup. Warpage was unavoidable, which was a problem considering the end plates needed to be straight for downstream welding and assembly operations. So multiple times during a shift, operators had to move the end plate assemblies to a separate press for straightening.

If you haven’t bought into a system yet and may pick up more outdoor power tools in the future, it may be wise to check out the entire lineup from a brand. Make sure they can fulfill your wish list before going after just the chain saw. For many users, the saw is likely to be a secondary tool when compared to the hours you spend with a string trimmer or mower.

The Kobalt 80V Max chainsaw—twin brother of the Greenworks 80V model—also had a hard time moving away from the bottom of the pack in each of our tests.

The previous manual operation produced just eight to 10 end plates over an eight-hour shift. “With this new robotic cell we were able to double production,” Koch said. “So we can now do 16 to 20 end plates per shift.”

Some of her recent work includes raising money for the family of fallen Police Officer Michael Michalski and raising money for a defibrillator for Cudahy’s youth football team.

As part of the change-up to RED AXS, Quarq is pushing out a new power meter as well. Though rather than be a completely new design, this is considered part of the DZero family, and thus all existing DZero power meters will receive the same pile of software features updates. In other words – at the end of the day whether your DZero power meter is 18 months old or bought as part of a new AXS groupset, it’ll have the exact same set of features.