I agree Toyota has had fine quality but they are not as good as they once were. GM is a lot better than they were but both MFGs have room for improvement.

Kobalt’s KT1015 Table Saw features value pricing with a decent rolling stand. We initially had questions about its dual-locking fence, but found that it actually worked quite well. There’s plenty of wobble in it, but if you follow our Pro Tip on adjustments in the fences section, you can lock the front end in square then stabilize it with the back lock.

Stop looking for excuses not to take the bus. I take the bus to West Bay Road every day. The buses run every three minutes to West Bay Road from George Town. The service is fine, but would like to see bigger buses.

Great. And then coming back to the opportunity you have and the R&D expenses to be expected, I guess you have indicated in the annual report I think that you expect to R&D expenses to rise from 3% to between 4% and 5%. Are we closer to — well, where are we now? When will the number peak?

If you don’t need to rip beyond the 2-1/2″ capacity, it has the power to stand alone. You’ll have to decide if you need a second battery, though.

Could these large dirty trucks not be kept off the road until after 9.00am – when most people have reached work?

Just like the Wrangler for many its a cool fun vehicle for a very short point in ones life that often looks far cooler than it actually turns out be, leading high demand and high turn over keeping used inventory and values high.

Q: How can I get rid of a smoky smell in our living room where we have a wood-burning fireplace? This smell has persisted long after we ended the fire season.

Thanks Ray, always love your reviews, and always go through your site to get on Amazon to try to support what you do!

Of course, welding and robot programming technology has evolved. First, engineers found that pulse welding (GMAW-P) could reduce problems with workpiece distortion. Combine this with a large copper heat sink on the fixturing table, and engineers found that distortion could be virtually eliminated. Working with Wolf Robotics, Mettler installed a robot welding cell that not only controls distortion of those end plates, but also takes weld programming and simulation offline.

Somewhere in the middle, lies the mini-v. The stubby sibling to v-brakes, (found on mountain bikes of yore) has become a popular option for riders who are still running frames with canti posts. Mini-v’s often offer improved braking performance over cantis. But the mini-v’s tolerance for mud is notoriously low, because to work effectively the pads need to run close to the rim so that the shorter cable pull of road-style levers will still provide enough movement to contact the rim without the lever bottoming out. For this reason, the brakes are a more popular choice amongst riders who experience mostly dry conditions.

;Let me then move to market update, and we start on the build rates for heavy trucks on Page 5. North America had a very good growth rate. Reported build rates is increasing — continues to increase. And we have heard from OEMs that they are more or less sold out for 2019. And also from the trailer builders, we have the same information. So it’s a strong market in North America, continued strong market.