There are some dirt-cheap tech deals across retailers today. Here’s a list of all the best gadgets on sale for less than $25.

The dual-clutch ’box allowed for a switch to a smaller transmission heat exchanger, which is good because the front end is positively stuffed with radiators; in fact, the GT500 has double the open area of the GT350 to ensure they all get air. The first, cleanest air goes to the supercharger, with the main radiator being mounted behind that and the transmission cooler below; an oil cooler and an auxiliary radiator can be found tucked into the outboard intakes.

To further understand how panel bending fits into a modern metal fabricating operation, let’s look at how two companies are using the technology to stay on top of increased production demands. Datum Storage Solutions Inc., Emigsville, Pa., and NSA Industries LLC, St. Johnsbury, Vt., adopted panel bending for different reasons, but they are finding that it’s delivered a similar result—additional bending capacity when they needed it most.

Besides electronics, other investment purchases to save big on during Cyber Monday are furniture pieces like sofas and bed frames. They’ll arrive just in time for your holiday party guests to enjoy and to accompany the new mattress you bought.

Galvanization is performed before the friction material is attached to the backing plate. By galvanizing the surface between the backing plate and friction material, the possibility of corrosion that can cause edge lift and delamination is potentially reduced.

Bosch’s REAXX punches the blade down using a cartridge similar to what is used in airbag deployment.

Great idea, stop the [ublic importing cars and must use car dealership. Wow, oh wait, who owns those…lol

Pros: Can use with guide tracks; precise adjustments all around; handy lever for lifting guard without taking your hand off the front knob; only front knob attached to the saw’s shoe for low grip that adds stability; lower guard has built-in riving knife; plunge-cut ability; can cut close to vertical surface – within 3/8 inches; pivot points on both front and rear for setting a stable bevel angle; vac port useful indoors

To me it made little difference. I rode the bike with 700c wheels and tires between 30 to 40mm wide and there were no dramatic handling differences. The standover height was noticeable but not bothersome since I primarily ride cyclocross bikes.

Power meter/chainring unit is $820, Sram offers a replacement program where you send in the old one and you get a replacement for half off, so $410. Kinda steep for anyone looking to keep the bike long term-ish. Maybe/probably fine for racers that are flipping bikes every or every other season.

Welll………. guess what?? it works! As an extra added bonus, it’s a whole lot less stressful than the usual stop-and-go to and from work. I am a bike warrior, hoping like hell some moonbat doesn’t kill me with an open door or quick lane change. Meanwhile, the more of us that do this, the less impact on the city centre.

I am currently running WTB Nano 40’s and Stans Alpha 340 rims which is a rather narrow rim/wide tire combination. I had to be very meticulous about pad placement, tucking it just under the bulbous tire for full brake track contact. While I don’t think I ever had any tire rub on the brake shoe, I have since replaced the pads with a set of Kool-Stop Thinlines—the same pads that come stock on the award-winning Paul Component mini-v’s—to give myself that tiny bit of extra space. This would be a non-issue for people running standard 33c tires, and a wider rim would likely remedy the problem for tires that have a bit more meat. I will note that the salmon compound on the new pads has improved the power of the brake.