You missed the point… which decent person going to ride these “bus”. Sorry, some – not all are shameful and dangerous drivers. Check who the drivers are…. and who they going to be.

Additional Notes: Though very solid in build quality, this saw needs to be updated to keep up with the competition. It runs at only half the RPMs of some of the other saws, which provides a lot of torque, but forces you to feed the cut very slowly to avoid a ragged edge.

For that reason, they do often seem to work best in amps that generate the majority of their signature tone in the preamp stages already. Also, using a master volume to achieve extremely low volume levels—but with a heavily cranked-up overdriven sound from a maxed-out gain control in the preamp—can often result in a fizzy, bees-in-a-tin-can tone.

Plenty has been written about using smaller amps to reduce volume levels while still hitting the amp’s "sweet spot" tone-wise, and there’s some sense to that. But plenty of us just like the sound of our bigger 30-, 50-, and 100-watt amps. We’d rather stick to that amp, and that sound, and help it fit the room better, rather than change up our rig entirely. In other cases, we’re already using smaller amps in the sub-20-watt, but those can still be too loud for some smaller clubs or to be satisfying for home or studio use.

7. Minor geometry revisions don’t spoil the RSV4 chassis recipe. The aluminum twin-spar frame has remained the same since the RSV4 was released in 2009. Since then, Aprilia has tweaked other aspects of the 1100 Factory to retain stability while also increasing agility in the face of new firepower. The steering inclination has been steepened using +3mm steering bushings on either end, effectively expanding the rake and shortening the wheelbase a tad. To maintain extremely close trail figures, the triple-tree offset was reduced by 2mm.

Also it could be time to put those yellow grids at some lights/roundabouts; don’t drive into that area unless your way is clear to drive out the other side of it.

In all, Datum has five common lengths: 24, 30, 36, 42, and 48 in. It also offers a range of widths, starting at 9 in. and going to 48 in., increasing in 1-in. increments. Additionally, all of these offerings might require some combination of knockouts, perforations, punches, and slots. These and other options also are available in shelving in the four-post line.

The DeWalt saws make up the second tier of saws. They are solid performers where it counts but not faultless. The Flexvolt model is a very fast cutter with respectable runtime while the 40 volt max saw outfitted with the 6.0 Ah battery ran slower. Still, it posted runtime numbers up with the top saws. The identical 40 volt max saw that comes with the 4.0 Ah battery was a step below its brandmates in both speed and runtime output.

On the other hand, a feature I think all chainsaws could benefit from is a coast-down brake like those we rely on with circular saws and miter saws. These useful brakes are found on the DeWalt Flexvolt and Greenworks Digi Pro saws.

Is the only Power Meter option the Integrated Quarq with the AXS? If I am currently running a Power2Max 5 bolts Spider, are there any way I can still use that?

European trailer builds are on declining numbers and it’s — the outlook is softer for 2019. But keep in mind, we had a good year of 2018 where we have growth numbers on the trailer build.

Would be nice to have a regular cab with some room behind the seat .Mounted on the 4 door Wrangled frame. And make the bed whatever length it needs to be to fit. It’s just me or a buddy going fishing. We all don’t need a school bus. I like the idea of a bed, Wet dogs, sloshing ice chests full of fish etc.