What size are the lugs? 12mm? More important than the number of lugs are the stud diameter and diameter of the lug pattern. Toyota said the 14mm stud 150mm pattern on the Land Cruiser/Tundra about 18% stronger than the 6 lug 12mm pattern.

On March 19, 2018, SondaSys (Ogrodzieniec, Poland; www.sondasys.com) began production using stereolithography (SLA) and selective laser melting (SLM) 3D printers in cooperation with the Chinese 3D printing company ZRapid Tech (Suzhou, China; www.zero-tek.com). At the Seventh International Conference on Lasers in Medicine (held July 13-13, 2017 in Timisoara, Romania), interest was shown for new applications in medicine with laser-based additive manufacturing methods for metal-ceramic. The Transport and Telecommunication Institute (Riga, Latvia) includes in the “Research program for 2015-2020” roadmap that 3D printing is one of the most important trends for R&D and education.

Any reason you can mix-match ring/cassette combinations, so instead of 35/48 with 10/28, running a 33/46 with the 10-28?

Okay. Thank you for questions, and I think we can close the quarter 1 presentation from Haldex. Thank you for participating.

Voltage regulators (also called "power scaling," "master voltage," and "xxx") are achieved via a network of components within the amp’s power supply, governed by a potentiometer that allows the player to reduce the DC voltages that feed the tubes. These components are responsible for how efficiently they operate and, therefore, how much they amplify the guitar signal that passes through them. Some such systems operate exclusively on the output stage, while others operate on the output and preamp stages alike. Fans of this solution uphold that it provides a natural-sounding way of reducing your volume level, since you aren’t changing the gain and tone settings by some external means, only reducing the amount of amplification that the tubes deliver.

Cutline Marker Accuracy: On at 90°. Off at 45° – kerf overlaps edge lineBlade Visibility: Good – small view windowBevel Angle Setting: Excellent – 1° increments; printed-on markings; good contrast; adjustable pointerGuard Action: Very Good on shave cuts – riving knife helpsTracking against Straightedge: Very Good – can only guide along left side thoughGrip and Trigger: Fair – horizontal handle makes the saw more difficult to operate one-handed; sliding safety button in the center of the handle requires repositioning hand for best cutting grip

Don’t overlook the basics, like your frying pan or your dinnerware. If you’ve been getting by with hand-me-downs or less-than-stellar pieces for the past few years, you may want to consider overhauling them for shiny new tools.

Price is one factor. It might be hard to justify the considerable expense for a seldom-used tool. But if you’re already invested in a cordless tool platform, system compatibility is likely of more concern. The reader who has already invested in a ton of tools, batteries, and chargers from XYZ brand is probably reading with keen interest in how the XYZ saw performed. If it is good enough, that’s probably going to be the one he buys, regardless of its exact placement in the ratings. This is one reason we comprehensively test and evaluate all of the models in the shootout. We don’t do eliminations which focus the most attention solely on the highest performing tools, which are oftentimes the highest priced, too.

Lay off the Ford cool aid. I have been hearing comments like that about the Ranger for years now. The Ranger will not be a top selling vehicle in its return. The truth is, the Ranger is too late to market and Ford won’t allow it to be successful in order to prevent it from cannibilizing the F-series.

We could not find any information on this slammed 944 but sometimes a picture is worth a thousand words. Just look at that set of rims and that stance. That sinister glistening black paint completes the picture.

An oldie but goodie—but past its prime. This model from Bosch has been around long enough to have participated in all my cordless circ saw tests during the past decade.

As a company Paul Stephens recognized a few years ago that there was another market for a cheaper product to allow enthusiasts to get on the restomod ladder. So, they created a series of fiberglass body panels under a new brand RS-Teknik, specifically for the 911SC and 3.2 Carrera models. These could be purchased separately, or as a complete kit allowing individuals to personalize their own 911. This particular car is a mechanically sound 1984 3.2 Carrera with 78,000 miles from new, that has been fitted with a widebody conversion inspired by the 70s 911RSR. Originally painted by Carrera bodyworks in Bury St Edmunds and finished in sport classic grey which is an original limited edition Porsche color, it is fitted with black centerd 17” split rim Fuchs inspired alloys, RUF CTR style door mirrors and soft tint side windows to give a subtle but aggressive look.