What really stands out among these results is that Echo has the lowest battery capacity among these top three runtime performers.

ANT: This is for head units to talk to SRAM components, but specifically on the rear derailleurs and Reverb only. So your Garmin for example won’t actually talk to SRAM over BLE or Airea, but only ANT+ (using the ANT+ Gear Shifting protocol). And specifically for shifting, it only discusses things with the rear derailleur, which knows the state of both front and rear. This is a notable design decision because in cases like a mountain 1x setup where you have no front derailleur, it’ll continue to work well from a design standpoint. If on a 2x setup you lose the battery on the rear, you’ll cease receiving ANT+ updates to your Garmin for shifting. Again, *no control* or configuration occurs over ANT+.

The Milwaukee cordless table saw with a 12.0 Ah High Output battery (216 watt-hours) and Rapid Charger runs $549. That’s obviously higher than your typical corded 10″ table saw and we expect that kind of premium.

This is the personal bike of Shamrock founder Tim O’Donnell, who built it to see if multiple down tubes—inspired by Ducati’s trellis frame motorcycles—perform differently than a single tube. (Spoiler: “It rides like a bike,” says O’Donnell.)

The high-performance Makita X2 sidewinder is right behind the power leaders with the second fastest cutting speed and the greatest cut depths.

Answer: Having pondered the subject for many years myself, I decided to do some research. In doing so I have the answer and a bit of history to relay as well. Let’s begin with how sheet metal initially was shaped and the tools that were used to accomplish the task.

We put our hands on 10 of the most popular table saws and tested them for accuracy, power, and functionality. It took some time, but we have some fairly conclusive results. Table saws are undeniably the kings of rip cuts on the jobsite and in shops. The concept is simple: Place a motor below a solid table to turn a blade somewhere in the 4000-5000 RPM range through the surface and watch the sawdust fly. The idea may be simple, but the reality is much different. How big should the table be? What size blade should you use? How heavy can you get away with making it? For this shootout, we’re looking specifically to find the best portable jobsite table saw.

Another interesting feature is the Gladiator’s rear suspension, which comes from the new RAM 1500 with a multi-arm configuration that significantly increases the comfort behind the wheel – an important element if you intend to drive this truck on a daily basis.

So without further ado, here are our five reasons to buy and not to buy Chevy’s midsize pickup truck.

Okay. So I’m not the only one who thinks this is crazy. But with how the groupset market works doesn’t surprise me. In the EU I never see anyone with a groupset older than 3 years. It’s very strange. Anecdotal but on hundreds of rides it’s strange.

In the spirit of holding an unlimited-class shootout, we went big. We got just about every saw 18 volts and higher on the market. There are a few omissions from a major brand or two, but those saws are currently being retooled or discontinued.

Let’s move forward and see what we could cover today. I will start to make a business summary. We will look at market updates. We will see on the sales and operations of Haldex. And Andreas will take the financial part, and I will end the session with the way forward. And in the end, we will open up for questions.