Okay. Then coming back, I mean you indicated the U.S. market is about to make a changeover to disc brake. Then I guess the launch of your truck disc brake is ready to supply to customers. When will that be?

It’s tough to be completely objective when choosing the best portable jobsite table saw since the stock blades vary so widely. Skilsaw comes with a 30-tooth Diablo blade and Makita’s stock 32-tooth blade are both excellent while others could use some help. To make this shootout about the saws and not the blades, we turned to Diablo to outfit each saw with the same accessory.

Deep Cutting Ability: Poor – very slow, difficult to cut without multiple stallsPower/Speed (fastest cut 2” deep across 4-feet of OSB): 24.14 secondsMax. Cut Speed (in 2” of OSB): 1.989 inches/second, 16th in speed

Aesthetically, Smith went to great lengths to make his GT-R as realistic as possible. Production GT fog lights, glass, electric windows, and power seats combine with reproduced door panels and center console to add the look of authenticity to Smith’s GT-R.

When using the side extension, a tape moves along so you won’t have to remember what measurement to lock the fence on or read a double marked measurement guide. It’s an innovation we like, but there are questions as to the long term durability of the tape itself. Like Ryobi, Ridgid uses a magnetic throat plate to secure it while leaving access simple.

Stop looking for excuses not to take the bus. I take the bus to West Bay Road every day. The buses run every three minutes to West Bay Road from George Town. The service is fine, but would like to see bigger buses.

5. The superb six-speed gearbox has had 5th, and 6th gears lengthened. With greater headroom comes the need for longer ratio gearing when holding the throttle wide open, on the massively long straightaway found at Mugello Circuit. Clicking through the gearbox is sublime, as its incredibly well-sorted thanks to the beautiful up/down quickshifter functions, one of the best I’ve used to date. The kill-times are matched perfectly for hard riding and not once did I find a false neutral. Just click a gear up or down, and you’ll be on your merry way.

4What one or two product trends are having the biggest impact for your company and your dealer customers? One trend we’ve observed that is making a big impact on The Tapco Group and our dealer customers is dark siding and light trim, as indicated by the pairing of Grayne engineered shingles and Kleer trimboard. As homeowners’ become more educated on the benefits of cedar replacement, they’re beginning to seek these low-maintenance, premium products that provide high quality performance and durability, and striking aesthetics from the curb to the doorstep. To truly achieve the premium look and durability that will last a lifetime, the proven value of our Grayne product is complemented by a trim package, like Kleer. At The Tapco Group, we fully stand behind all of our brands and products, ensuring that our dealers can work with our product confidently to provide customers with the most premium product on the market.

The victim then drove himself to work and called his boss from the parking lot to tell him to call for help.

Many engineers have little to no experience operating these excessively long trains. We have many instances of these trains breaking in two and causing significant delays, including delaying an Amtrak train for 9 hours on a siding.

Now consider 16-gauge mild steel. The sheet has a nominal thickness of 0.059 in., an upper limit of 0.0648 in., and a lower limit of 0.0548 in., giving us a range of 0.010 in. Add this to the 0.002-in. depth-of-penetration variation noted earlier, and you can see how the variabilities really add up.

“One of the most commonly overlooked operations when it comes to setting up a vehicle is the removal of seam sealer and undercoating from where the pinchweld clamp will be placed,” I-CAR wrote. “If seam sealer or undercoating is left in the area, not only will it plug the teeth of the clamp, but it may also allow the vehicle to slip in the clamps. This could also result in an incorrect measurement due to the vehicle shifting. After removing the pinchweld clamps, seam sealer and undercoating must be reapplied to restore appearance and corrosion protection.