Aside from the absolutely obscene pricing, what volume are they going to have to sell to make up for the free units used by Trek and Katusha? There is a price after all.

I purchased a skil brand cordless circular saw at a goodwill store. I purchased a battery and charger off ebay. It works, but has weak power. Would this be the battery or the motor? I assume that this saw has a powerful enough motor? (assuming it works like it is supposed to) Please advise.

While these cars may polarize Porsche purists, we say the community is stronger and richer because of this diversity. So here it is, our list and gallery of the best restomod, outlaw and just crazy cool custom Porches.

This is the most worthless thing I every purchased. I did not get enough pressure to wash a dish. Then Prime Time solutions did not send the battery and charger with the gun. After waiting on two deliveries.The item proved Wothless. Now I face the ordeal of getting my money Back.

By the end of the year, Datum will add a large P4 panel bending machine and attach it to its 7-year-old Salvagnini S4 punching and shearing machine to create an automated workcell where a blank will be turned into a punched and bent part without any human intervention. Eaton said that the company is even thinking about adding a welding cell right beside this punch/panel bending cell to further reduce material handling.

And our net debt-equity ratio has increased to 55% compared to 45% last year, again, related to the increased pension liability and the increased usage of the credit facility.

Ekkehard Zimmermann’s DP Motorsport has been building slantnose 911s before every Porsche fan thought it was cool. Inspired by the 935s (DP built the bodywork for the 1979 Le Mans-winning K3), the DP935 series was a close to the original racer as possible.

The second method to prevent corrosion is to apply an outer layer to prevent the environment from interacting with the steel and causing oxidation. External coatings like paint or plating only work if they are attached. The more resistant the outer layer is to heat, mechanical and chemical damage, the lower the chance of corrosion.

1. No Trailer Brake Controller We all know nobody tows anyway, especially midsize vehicles, yet we’re shocked that Jeep cut corners by not offering something that hardly anybody would use.

As for better dealers being GM only means little. It is more due to larger dealer networks that can get lost in just interest in moving cars only not full service experience.

The external bend angles are slightly less than 90 degrees, giving the ribs an ever-so-subtle trapezoidal shape after they’re welded to the scale’s deck plate. After inspection, the magnetic hoist grasps the ribs by the bottom of the channel and stacks them on wood blocks, where they’re moved to welding.

In a worst-case scenario, the corrosion causes a large portion of the friction material to separate from the backing plate. This can increase the stopping distance of the vehicle.