China Fast delivery 72 Inch Sheet Metal Brake - 2000E Powered 2000mm x 1.6mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG Manufacturer and Supplier

Fast delivery 72 Inch Sheet Metal Brake - 2000E Powered 2000mm x 1.6mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG

Short Description:

Product Detail

Product Tags

Feedback (2)

We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for Electric Bending Machine , Letter Folder , Cnc Hydraulic Press Brake , Safety through innovation is our promise to each other.

Fast delivery 72 Inch Sheet Metal Brake - 2000E Powered 2000mm x 1.6mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG Detail:

JDC BEND™2000E Powered 2000mm x 1.6mm Electromagnetic Sheet Metal Folding Machine

Product image is only a representation, actual product appearance may differ slightly

JDC BEND™2000E Powered High performance electromagnetic sheet metal folder Specifications

Nominal capacity	2000mm x 1.6 mm (6ft x 16g)
Nominal capacity	78” (6-foot) length with a maximum capacity of 16 gauge mild steel.
Clamping force (with standard full-length clampbar)	9Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
Recommended for	HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more.
Eletrical Supply:	1Phase & Pneumatic air supply, 220/240 V ac and will work at virtually any site.
Nominal current:	15 Amp
Duty cycle:	30%
Box Depth	Unlimited
Bend Angle	0-180°
Max. Clamping Bar Lift	Unlimited
Max. Capacity with Extension	18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension	16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out	158°F (70°C)
Shipping dimensions	2.2m x 0.95m x 1.1m = 2.4m3
GW/NW	400kg/360kg
Blade gap adjustment	Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.
adjustable back gauges	Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control	lets you deliver repeatable bends time after time.
Notes	Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.
Easy operation	1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend.
open-ended design	1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn’t reliant on conventional finger depths.
Standard accessories	include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars.
Optional accessories	available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly
Special tooling	Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling
Operator Safety	Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

With standard bending-beam extension fitted

For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.

1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com

specifications subject to change without notice.

Every JDC BEND modle have in stock , We can arrange shipping to you ASAP

Product detail pictures:

Related Product Guide:
Correction: ‘Who Pays?’: 64% of shops successful at pinchweld work reimbursement | 48 Box And Pan Brake
Getting Hitched: The Best Hitch Accessories for Your Car | Baileigh Tools

"Sincerity, Innovation, Rigorousness, and Efficiency" could be the persistent conception of our organization for your long-term to establish alongside one another with shoppers for mutual reciprocity and mutual benefit for Fast delivery 72 Inch Sheet Metal Brake - 2000E Powered 2000mm x 1.6mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG , The product will supply to all over the world, such as: Detroit , Somalia , Sao Paulo , We attained ISO9001 which provides solid foundation for our further development. Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments. It is our great honor to meet your demands. We are sincerely expecting your attention.

Angle Bender