China China Gold Supplier for Manual Benders - 1250E Magnetic sheet metal brake – JINDONGCHENG Manufacturer and Supplier

China Gold Supplier for Manual Benders - 1250E Magnetic sheet metal brake – JINDONGCHENG

Short Description:

Product Detail

Product Tags

Feedback (2)

As for competitive charges, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we have been the lowest around for 6" Metal Brake , Electric Press Brake Machine , Hydraulic Folding Machine , And we are able to enable on the lookout for any products with the customers' needs. Make sure deliver the best Assistance, the most beneficial High-quality, The quickly Delivery.

China Gold Supplier for Manual Benders - 1250E Magnetic sheet metal brake – JINDONGCHENG Detail:

JDC BEND™ 1250E Magnetic sheet metal brake

Product image is only a representation, actual product appearance may differ slightly

JDC 1250E High performance electromagnetic sheet metal folder Specifications

Nominal capacity	1250 mm x 1.6 mm (4ft x 16g)15 to 635 mm
Nominal capacity	48” (4-foot) length with a maximum capacity of 16 gauge mild steel.
Clamping force (with standard full-length clampbar)	6 Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
Recommended for	HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more.
Eletrical Supply:	1 phase, 220/240 V ac and will work at virtually any site.
Nominal current:	8 Amp
Duty cycle:	30%
Box Depth	Unlimited
Bend Angle	0-180°
Max. Clamping Bar Lift	Unlimited
Max. Capacity with Extension	18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension	16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out	158°F (70°C)
Shipping dimensions	1.41m x 0.38m x 0.32m = 0.17m3
GW/NW	180/150kg
Blade gap adjustment	Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.
adjustable back gauges	Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control	lets you deliver repeatable bends time after time.
Notes	Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.
Easy operation	1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend.
open-ended design	1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn’t reliant on conventional finger depths.
Standard accessories	include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars.
Optional accessories	available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly
Special tooling	Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling
Operator Safety	Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

With standard bending-beam extension fitted

For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.

1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com

specifications subject to change without notice.

Every JDC BEND modle have in stock , We can arrange shipping to you ASAP

Product detail pictures:

Related Product Guide:
Bosch Reaxx vs SawStop JSS-MCA Table Saw | Clamping Box Brake
Metal Stamping Market in Machinery and Equipment sector Expected To Grow At A CAGR of 4.92% For The Period 2018-2023 | Brake Sheet Metal

We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for China Gold Supplier for Manual Benders - 1250E Magnetic sheet metal brake – JINDONGCHENG , The product will supply to all over the world, such as: Portland , Macedonia , Estonia , As an experienced factory we also accept customized order and make it same as your picture or sample specifying specification and customer design packing. The main goal of the company is to live a satisfactory memory to all the customers, and establish a long term win-win business relationship. For more information, please contact us. And It is our great pleasure if you like to have a personally meeting in our office.

Box And Pan Folders

Cnc Press Brake Machine

Hand Bender

Metal Fab Tools

Small Folding Machine

Stainless Steel Bending Machine

The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.