China 100% Original Factory Manual Sheet Bender - 1250E Magnetic sheet metal brake – JINDONGCHENG Manufacturer and Supplier

100% Original Factory Manual Sheet Bender - 1250E Magnetic sheet metal brake – JINDONGCHENG

Short Description:

Product Detail

Product Tags

Feedback (2)

Good quality To start with,and Purchaser Supreme is our guideline to offer the top service to our customers.Presently, we've been seeking our best to be amongst the top exporters inside our industry to fulfill consumers extra need to have for Letter Folding Machine , Letter Folding Machine , Metal Roofing Forming Machine , Encouraged with the fast producing current market on the speedy foodstuff and beverage consumables all around the entire world , We're hunting forward to functioning with partners/clients to create good results together.

100% Original Factory Manual Sheet Bender - 1250E Magnetic sheet metal brake – JINDONGCHENG Detail:

JDC BEND™ 1250E Magnetic sheet metal brake

Product image is only a representation, actual product appearance may differ slightly

JDC 1250E High performance electromagnetic sheet metal folder Specifications

Nominal capacity	1250 mm x 1.6 mm (4ft x 16g)15 to 635 mm
Nominal capacity	48” (4-foot) length with a maximum capacity of 16 gauge mild steel.
Clamping force (with standard full-length clampbar)	6 Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
Recommended for	HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more.
Eletrical Supply:	1 phase, 220/240 V ac and will work at virtually any site.
Nominal current:	8 Amp
Duty cycle:	30%
Box Depth	Unlimited
Bend Angle	0-180°
Max. Clamping Bar Lift	Unlimited
Max. Capacity with Extension	18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension	16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out	158°F (70°C)
Shipping dimensions	1.41m x 0.38m x 0.32m = 0.17m3
GW/NW	180/150kg
Blade gap adjustment	Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.
adjustable back gauges	Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control	lets you deliver repeatable bends time after time.
Notes	Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.
Easy operation	1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend.
open-ended design	1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn’t reliant on conventional finger depths.
Standard accessories	include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars.
Optional accessories	available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly
Special tooling	Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling
Operator Safety	Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

With standard bending-beam extension fitted

For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.

1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com

specifications subject to change without notice.

Every JDC BEND modle have in stock , We can arrange shipping to you ASAP

Product detail pictures:

Related Product Guide:
A Car Guy’s Christmas List Of Travel Necessities. All For Under $100 | Clamping Box Brake
Trump administration underestimated benefit of better brakes on trains with explosive hauls | Brake Sheet Metal

owing to fantastic assistance, a variety of high quality goods, aggressive rates and efficient delivery, we love a very good popularity among our customers. We are an energetic firm with wide market for 100% Original Factory Manual Sheet Bender - 1250E Magnetic sheet metal brake – JINDONGCHENG , The product will supply to all over the world, such as: Sudan , Norwegian , Tanzania , The credibility is the priority, and the service is the vitality. We promise we have the ability to provide excellent quality and reasonable price products for customers. With us, your safety is guaranteed.

Angle Bender

Electra Brake Eb-1250

Folding Machine For Sale

Harbor Freight Metal Brake

Metal Bender Brakes

Sheet Metal Manual Folding Machine

The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.