China Super Lowest Price Aluminium Brake - JDC BEND™ 650E Powered 650mm x 1.6mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG Manufacturer and Supplier

Super Lowest Price Aluminium Brake - JDC BEND™ 650E Powered 650mm x 1.6mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG

Short Description:

Product Detail

Product Tags

Feedback (2)

Every single member from our higher effectiveness product sales staff values customers' requires and organization communication for Manual Sheet Metal Folding Machine , Magnetic Pan Brake , Cheap Metal Brake , We are expecting to cooperate with you on the basis of mutual benefits and common development. We will never disappoint you.

Super Lowest Price Aluminium Brake - JDC BEND™ 650E Powered 650mm x 1.6mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG Detail:

JDC BEND™ 650E Powered 650mm x 1.6mm Electromagnetic Sheet Metal Folding Machine.No more lifting!

Product image is only a representation, actual product appearance may differ slightly

JDC BEND™ 650E Powered 650mm x 1.6mm Electromagnetic Sheet Metal Folding Machine Specifications

Nominal capacity

650 mm x 1.6 mm (2ft x 16g)

25.5”(2-foot) length with a maximum capacity of 16 gauge mild steel.

Clamping force (with standard full-length clampbar)

3Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the
brake.

Recommended for

HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops.
Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as
scrolling applications.
Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated
materials, heated plastics,and more.

Eletrical Supply:

220/240 V 1Phase & Pneumatic air supply and will work at virtually any site.

Nominal current:

8 Amp

Duty cycle:

30%

Box Depth

Unlimited

Bend Angle

0-180°

Max. Clamping Bar Lift

Unlimited

Max. Capacity with Extension

18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel

Max. Capacity without Extension

16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel

Thermal Cut-Out

158°F (70°C)

Shipping dimensions

0.88m x 1.1m x m = 0.92m3

GW/NW

127kg/110kg

Blade gap adjustment

Blade gap adjustment on the clamping bars lets you work with sheet metal of different
thicknesses.

adjustable back gauges

Comes with product supports and adjustable back gauges for production runs.

Scaled stroke angle control

lets you deliver repeatable bends time after time.

Notes

Capacities can change depending on set up leaf extension. Rule of thumb for mild steel,
16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.

Easy operation

1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers
safely out of the machine and you to reposition the material.
4. Lift the the bottom bending leaf to complete the bend and repositioned ready for
another bend.

open-ended design

1. allows you to create fully enclosed ducts and shapes impossible to make with a
traditional box and pan brake.
2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost
any depth,since it isn’t reliant on conventional finger depths.

Standard accessories

include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete
set of short-length clamp-bars.

Optional accessories

available for these models include a narrow clampbar, a slotted clampbar for forming
shallow boxes more quickly

Special tooling

Special tooling can be quickly improvised from pieces of steel to help fold-up difficult
shapes, and for production work the standard clampbars can be replaced by specialised
tooling

Operator Safety

Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe
pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

With standard bending-beam extension fitted

For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.

1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com

specifications subject to change without notice.

Every JDC BEND modle have in stock , We can arrange shipping to you ASAP

Product detail pictures:

Related Product Guide:
Alfa Romeo Giulia, Stelvio get flashy F1 racing special editions | 48 Box And Pan Brake
Best Custom Bikes from NAHBS 2019 | 48 Box And Pan Brake

We thinks what customers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better good quality, lower processing costs, prices are extra reasonable, won the new and old buyers the support and affirmation for Super Lowest Price Aluminium Brake - JDC BEND™ 650E Powered 650mm x 1.6mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG , The product will supply to all over the world, such as: New Orleans , Indonesia , Mauritius , Our mission is "Provide Products with Reliable Quality and Reasonable Prices". We welcome customers from every corner of the world to contact us for future business relationships and achieving mutual success!

48 Finger Brake