Quality Inspection for Folding Machine For Sheet Metal - 420E Magnetic sheet metal brake JDC BEND 420E – JINDONGCHENG

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Reliable good quality and very good credit standing are our principles, which will help us at a top-ranking position. Adhering to your tenet of "quality 1st, purchaser supreme" for Automatic Folding Machine , Harbor Freight Metal Brake , Manual Sheet Metal Folding Machine , For more info, be sure to call us as shortly as possible!
Quality Inspection for Folding Machine For Sheet Metal - 420E Magnetic sheet metal brake JDC BEND 420E – JINDONGCHENG Detail:

JDC BEND™ 420E Magnetic sheet metal brake

Product image is only a representation, actual product appearance may differ slightly

JDC 420E High performance electromagnetic sheet metal folder Specifications

Nominal capacity 420 mm x 1.6 mm
16.5” (1.3-foot)-aximum capacity of 16 gauge mild steel.
Clamping force (with standard full-length clampbar) 3Tons  is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
Recommended for HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops.
Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications.
Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more.
Eletrical Supply: 1 phase, 220/240 V ac and will work at virtually any site.
Nominal current: 8 Amp
Duty cycle: 30%
Box Depth Unlimited
Bend Angle 0-180°
Max. Clamping Bar Lift Unlimited
Max. Capacity with Extension 18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension 16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out 158°F (70°C)
Shipping dimensions 0.65m x 0.31m x 0.32m = 0.06m3 
GW/NW 60kg/50kg
Blade gap adjustment Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.
adjustable back gauges Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control lets you deliver repeatable bends time after time.
Notes Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.
Easy operation 1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material.
4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend.
open-ended design 1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake.                                                                                                                         

2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn’t reliant on conventional finger depths.

Standard accessories include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars.
Optional accessories  available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly
Special tooling  Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling
Operator Safety Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress) THICKNESS LIP WIDTH (minimum) BEND RADIUS (typical)
Mild Steel
(250/320 MPa)
1.6 mm 30 mm* 3.5 mm
1.2 mm 15 mm 2.2 mm
1.0 mm 10 mm 1.5 mm
Aluminium
Grade 5005 H34
(140.160 MPa)
1.6 mm 30 mm* 1.8 mm
1.2 mm 15 mm 1.2 mm
1.0 mm 10 mm 1.0 mm
Stainless Steel
Grades 304, 316
(210/600 MPa)
1.0 mm 30 mm* 3.5 mm
0.9 mm 15 mm 3.0 mm
0.8 mm 10 mm 1.8 mm

With standard bending-beam extension fitted

For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.

1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com

specifications subject to change without notice.

Every JDC BEND modle have in stock , We can arrange shipping  to you ASAP 


Product detail pictures:

Quality Inspection for Folding Machine For Sheet Metal -
 420E Magnetic sheet metal brake  JDC BEND 420E – JINDONGCHENG detail pictures


Related Product Guide:
Inside The Watkins M001: Exclusive Builder Interview | Clamping Box Brake
Dallas Invents: 79 Patents Granted for Week of July 31 » Dallas Innovates | Clamping Box Brake

We are commitment to offer the competitive price ,outstanding products quality, as well as fast delivery for Quality Inspection for Folding Machine For Sheet Metal - 420E Magnetic sheet metal brake JDC BEND 420E – JINDONGCHENG , The product will supply to all over the world, such as: Suriname , South Africa , Sao Paulo , We'll continue to devote ourselves to market & product development and build a well-knit service to our customer to create a more prosperous future. Please contact us today to find out how we can work together.
  • We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Phoenix from Ghana - 2015.12.10 19:03
    It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Clara from Johor - 2016.01.28 19:59
    Write your message here and send it to us
    WhatsApp Online Chat !