Give Me a Brake: Types of Sheet Metal Brakes and How to Use Them

The metalworking industry employs several types of machinery for its operations. One of these machines is the sheet metal brake, which is used to bend various types of metal. If you need to bend sheet metal, then the sheet metal brake is your best bet.

There are three major components of a sheet metal brake. The first one is a clamp. This clamp holds the sheet metal down firmly so that it won’t move around while it is being bent. The second is a bending plate where you will place the sheet metal. The last component is a lever, which will lift the bending plate until you achieve the needed angle for the bend.

There are three main types of sheet metal brake.

Cornice Brake

The most commonly used type of sheet metal brake, the cornice brake was patented in 1882. It is a large tool that can make straight bends and simple creases across a sheet of metal.

Box and Pan Brake or Finger Brake

Also known as the “finger brake” because it comes with a series of steel fingers of different widths, the box and pan brake is used to make pans, boxes, and other such objects. All you have to do to create these shapes is to use only the fingers that are needed to make the bend. Since the fingers are secured by thumbscrews, you need to make sure that the ones that you’re going to use are fastened securely and tightened firmly before you use the box and pan brake.


Post time: Apr-01-2021
WhatsApp Online Chat !