Free sample for Bending - 2000E Magnetic sheet metal brake – JINDONGCHENG

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We intention to see quality disfigurement within the creation and supply the ideal support to domestic and overseas buyers wholeheartedly for Electromagnetic Bending Machine , Pan Brake , Box And Pan Sheet Metal Brake , In order to expand our international market, we mainly supply our oversea customers Top quality performance products and service.
Free sample for Bending - 2000E Magnetic sheet metal brake – JINDONGCHENG Detail:

JDC BEND™ 2000E Magnetic sheet metal brake

Product image is only a representation, actual product appearance may differ slightly

JDC 2000E High performance electromagnetic sheet metal folder Specifications

Nominal capacity 2000mm x 1.6 mm (6ft x 16g)
78” (6-foot) length with a maximum capacity of 16 gauge mild steel.
Clamping force (with standard full-length clampbar) 9Tons  is consistent across the entire beam, allowing for crisp bends even
in the middle of the brake.
Recommended for HVAC shops,Tech schools, industrial art shops, and general sheet metal
fabrication shops.

Making enclosed boxes, triangles, alternate bends on varying planes, and
round items such as scrolling applications.

Bending a variety of materials, including sheets of mild steel, stainless steel,
aluminum, coated materials, heated plastics,and more.
Eletrical Supply: 1 phase, 220/240 V ac and will work at virtually any site.
Nominal current: 15 Amp
Duty cycle: 30%
Box Depth Unlimited
Bend Angle 0-180°
Max. Clamping Bar Lift Unlimited
Max. Capacity with Extension 18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension 16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out 158°F (70°C)
Shipping dimensions 2.2m x 0.33m x 0.32m = 0.24m3 
GW/NW 280kg/250kg
Blade gap adjustment Blade gap adjustment on the clamping bars lets you work with sheet metal
of different thicknesses.
adjustable back gauges Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control lets you deliver repeatable bends time after time.
Notes Capacities can change depending on set up leaf extension. Rule of thumb for
mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner,
extension On.
Easy operation 1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps your
fingers safely out of the machine and you to reposition the material.

4. Lift the the bottom bending leaf to complete the bend and repositioned ready
for another bend.
open-ended design 1. allows you to create fully enclosed ducts and shapes impossible to make with
a traditional box and pan brake.                                                                                                                         
2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to
almost any depth,since it isn’t reliant on conventional finger depths.
Standard accessories include a storage tray, adjustable backstops, A full-length clamp-bar,and a
complete set of short-length clamp-bars.
Optional accessories  available for these models include a narrow clampbar, a slotted clampbar for
forming shallow boxes more quickly
Special tooling  Special tooling can be quickly improvised from pieces of steel to help fold-up
difficult shapes, and for production work the standard clampbars can be replaced
by specialised tooling
Operator Safety Operator Safety is enhanced by a two-handed electrical interlock that ensures a
safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress) THICKNESS LIP WIDTH (minimum) BEND RADIUS (typical)
Mild Steel
(250/320 MPa)
1.6 mm 30 mm* 3.5 mm
1.2 mm 15 mm 2.2 mm
1.0 mm 10 mm 1.5 mm
Aluminium
Grade 5005 H34
(140.160 MPa)
1.6 mm 30 mm* 1.8 mm
1.2 mm 15 mm 1.2 mm
1.0 mm 10 mm 1.0 mm
Stainless Steel
Grades 304, 316
(210/600 MPa)
1.0 mm 30 mm* 3.5 mm
0.9 mm 15 mm 3.0 mm
0.8 mm 10 mm 1.8 mm

With standard bending-beam extension fitted

For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.

1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com

specifications subject to change without notice.

Every JDC BEND modle have in stock , We can arrange shipping  to you ASAP 


Product detail pictures:

Free sample for Bending -
 2000E Magnetic sheet metal brake – JINDONGCHENG detail pictures


Related Product Guide:
Don’t Sink Review | TheXboxHub Don’t Sink Review | Clamping Box Brake
HOUSE WORKS: Boosting wall insulation; ozone | Homes | Living | Clamping Box Brake

We insist on offering high-quality creation with superior business enterprise concept, honest revenue plus the greatest and fast service. it will bring you not only the high quality solution and huge profit, but essentially the most significant is usually to occupy the endless market for Free sample for Bending - 2000E Magnetic sheet metal brake – JINDONGCHENG , The product will supply to all over the world, such as: European , Las Vegas , Guyana , Our company is working by the operation principle of "integrity-based, cooperation created, people oriented, win-win cooperation". We hope we can have a friendly relationship with businessman from all over the world.
  • On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
    5 Stars By Mary from Frankfurt - 2015.05.13 17:00
    The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
    5 Stars By Marguerite from Los Angeles - 2015.12.10 19:03
    Write your message here and send it to us
    WhatsApp Online Chat !