China factory Outlets for Electra Brake Manual Folder - 320E Magnetic sheet metal brake JDC BEND 320E – JINDONGCHENG Manufacturer and Supplier

factory Outlets for Electra Brake Manual Folder - 320E Magnetic sheet metal brake JDC BEND 320E – JINDONGCHENG

Short Description:

Product Detail

Product Tags

Feedback (2)

Assume full obligation to meet all demands of our customers; accomplish ongoing advancements by promoting the advancement of our customers; become the final permanent cooperative partner of clientele and maximize the interests of shoppers for Aluminum Profile Folding Machine , Metal Sheet Folding Machine , Sheet Metal Equipment , "Passion, Honesty, Sound service, Keen cooperation and Development" are our goals. We are here expecting friends all over the world!

factory Outlets for Electra Brake Manual Folder - 320E Magnetic sheet metal brake JDC BEND 320E – JINDONGCHENG Detail:

JDC BEND™ 320E Magnetic sheet metal brake Product image is only a representation, actual product appearance may differ slightly

JDC 320E High performance electromagnetic sheet metal folder Specifications

Nominal capacity

320 mm x 1.6 mm

12.5” (1-foot) length with a maximum capacity of 16 gauge mild steel.

Clamping force (with standard full-length clampbar)

3Tons is consistent across the entire beam, allowing for crisp bends even in the middle
of the brake.

Recommended for

HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops.
Making enclosed boxes, triangles, alternate bends on varying planes, and round items such
as scrolling applications.
Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum,
coated materials, heated plastics,and more.

Eletrical Supply:

1 phase, 220/240 V ac and will work at virtually any site.

Nominal current:

8 Amp

Duty cycle:

30%

Box Depth

Unlimited

Bend Angle

0-180°

Max. Clamping Bar Lift

Unlimited

Max. Capacity with Extension

18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel

Max. Capacity without Extension

16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel

Thermal Cut-Out

158°F (70°C)

Shipping dimensions

0.55m x 0.31m x 0.28m = 0.05m3

GW/NW

50/45kg

Blade gap adjustment

Blade gap adjustment on the clamping bars lets you work with sheet metal of different
thicknesses.

adjustable back gauges

Comes with product supports and adjustable back gauges for production runs.

Scaled stroke angle control

lets you deliver repeatable bends time after time.

Notes

Capacities can change depending on set up leaf extension. Rule of thumb for mild steel,
16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.

Easy operation

1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers
safely out of the machine and you to reposition the material.
4. Lift the the bottom bending leaf to complete the bend and repositioned ready for
another bend.

open-ended design

1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake.

2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any
depth,since it isn’t reliant on conventional finger depths.

Standard accessories

include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set
of short-length clamp-bars.

Optional accessories

available for these models include a narrow clampbar, a slotted clampbar for forming
shallow boxes more quickly

Special tooling

Special tooling can be quickly improvised from pieces of steel to help fold-up difficult
shapes, and for production work the standard clampbars can be replaced by specialised
tooling

Operator Safety

Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe
pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

With standard bending-beam extension fitted
For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.
1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com
specifications subject to change without notice.
Every JDC BEND modle have in stock , We can arrange shipping to you ASAP

Product detail pictures:

Related Product Guide:
7 Ways to Get High-Volume Tube Tone Without Being Too | Brake Sheet Metal
Milwaukee M18 Fuel 7-1/4″ Miter Saw Review | Clamping Box Brake

We pursue the administration tenet of "Quality is superior, Services is supreme, Standing is first", and will sincerely create and share success with all customers for factory Outlets for Electra Brake Manual Folder - 320E Magnetic sheet metal brake JDC BEND 320E – JINDONGCHENG , The product will supply to all over the world, such as: Rome , belarus , panama , To win customers' confidence, Best Source has set up a strong sales and after-sales team to provide the best product and service. Best Source abides by the idea of "Grow with customer" and philosophy of "Customer-oriented" to achieve cooperation of mutual trust and benefit. Best Source will always stand ready to cooperate with you. Let's grow together!

Bending Steel Plate