China China Factory for Bend Brakes For Industrial Machine - 1000E Magnetic sheet metal brake – JINDONGCHENG Manufacturer and Supplier

China Factory for Bend Brakes For Industrial Machine - 1000E Magnetic sheet metal brake – JINDONGCHENG

Short Description:

Product Detail

Product Tags

Feedback (2)

We offer great strength in quality and development,merchandising,sales and marketing and operation for Industrial Folding Machine , Nc Sheet Metal Bending Machine , Aluminium Sheet Folding Machine , We warmly welcome friends from all walks of existence to cooperate with us.

China Factory for Bend Brakes For Industrial Machine - 1000E Magnetic sheet metal brake – JINDONGCHENG Detail:

JDC BEND™ 1000E Magnetic sheet metal brake

Product image is only a representation, actual product appearance may differ slightly

JDC 1000E High performance electromagnetic sheet metal folder Specifications

Nominal capacity	1000 mm x 1.6 mm
Nominal capacity	39” (3-foot) length with a maximum capacity of 16 gauge mild steel.
Clamping force (with standard full-length clampbar)	4.5Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
Recommended for	HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more.
Eletrical Supply:	1 phase, 220/240 V ac and will work at virtually any site.
Nominal current:	10 Amp
Duty cycle:	30%
Box Depth	Unlimited
Bend Angle	0-180°
Max. Clamping Bar Lift	Unlimited
Max. Capacity with Extension	18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension	16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out	158°F (70°C)
Shipping dimensions	1.17m x 0.38m x 0.32m = 0.12m3
GW/NW	110kg/100kg
Blade gap adjustment	Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.
adjustable back gauges	Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control	lets you deliver repeatable bends time after time.
Notes	Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.
Easy operation	1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend.
open-ended design	1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn’t reliant on conventional finger depths.
Standard accessories	include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars.
Optional accessories	available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly
Special tooling	Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling
Operator Safety	Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

With standard bending-beam extension fitted

For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.

1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com

specifications subject to change without notice.

Every JDC BEND modle have in stock , We can arrange shipping to you ASAP

Product detail pictures:

Related Product Guide:
Adam Collard puts Ferne McCann drama behind him as TOWIE star claims he badmouthed daughter Sunday | Baileigh Tools
Ridgid MS255SR 10-inch Dual Bevel Miter Saw Review | Clamping Box Brake

We've been commitment to offer the competitive rate ,outstanding merchandise good quality, too as fast delivery for China Factory for Bend Brakes For Industrial Machine - 1000E Magnetic sheet metal brake – JINDONGCHENG , The product will supply to all over the world, such as: Austria , Angola , Durban , We have established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we are looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more details.

Bending Metal Machine

Clamping Box Brake

Letter Folding Machine

Magnetic Bending Machine

Magnetic Pan Brake

Manual Sheet Metal Folding Machine

Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.

By Denise from Costa rica - 2015.02.21 12:14

We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!

By Aaron from Haiti - 2016.11.12 12:31

Write your message here and send it to us