China Cheapest Factory Oem Magnetic Sheet Metal Brake - 650E Magnetic sheet metal brake – JINDONGCHENG Manufacturer and Supplier

Cheapest Factory Oem Magnetic Sheet Metal Brake - 650E Magnetic sheet metal brake – JINDONGCHENG

Short Description:

Product Detail

Product Tags

Feedback (2)

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Box And Pan Folders , Metal Roofing Machine , Manual Metal Bending Tools , Welcome to visit our company and factory. Please feel free to get in touch with us if you need any further assistance.

Cheapest Factory Oem Magnetic Sheet Metal Brake - 650E Magnetic sheet metal brake – JINDONGCHENG Detail:

JDC BEND™ 650E Magnetic sheet metal brake

Product image is only a representation, actual product appearance may differ slightly

JDC 1250E High performance electromagnetic sheet metal folder Specifications

Nominal capacity	650 mm x 1.6 mm (2ft x 16g)
Nominal capacity	25.5”(2-foot) length with a maximum capacity of 16 gauge mild steel.
Clamping force (with standard full-length clampbar)	3Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
Recommended for	HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more.
Eletrical Supply:	1 phase, 220/240 V ac and will work at virtually any site.
Nominal current:	8 Amp
Duty cycle:	30%
Box Depth	Unlimited
Bend Angle	0-180°
Max. Clamping Bar Lift	Unlimited
Max. Capacity with Extension	18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension	16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out	158°F (70°C)
Shipping dimensions	0.88m x 0.38m x 0.32m = 0.1m3
GW/NW	86kg/72kg
Blade gap adjustment	Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.
adjustable back gauges	Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control	lets you deliver repeatable bends time after time.
Notes	Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.
Easy operation	1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend.
open-ended design	1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn’t reliant on conventional finger depths.
Standard accessories	include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars.
Optional accessories	available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly
Special tooling	Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling
Operator Safety	Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

With standard bending-beam extension fitted
For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.
1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com
specifications subject to change without notice.
Every JDC BEND modle have in stock , We can arrange shipping to you ASAP

Product detail pictures:

Related Product Guide:
Spied: 2020 Mercedes CLA Shooting Brake | Portable Siding Brake
Jacobs company helps enhance learners’ skills | Brake Sheet Metal

As for competitive charges, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we have been the lowest around for Cheapest Factory Oem Magnetic Sheet Metal Brake - 650E Magnetic sheet metal brake – JINDONGCHENG , The product will supply to all over the world, such as: USA , Pakistan , Indonesia , We only supply quality items and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom merchandise etc that can according to customer's requirement.

Bending Brake

Manual Benders

Manual Pan Brake Folder

Metal Letter Sign Bending Machine

Metal Roofing Machine

Press Brake

The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!