2017 Latest Design Automatic Press Brake - 650E Magnetic sheet metal brake – JINDONGCHENG
2017 Latest Design Automatic Press Brake - 650E Magnetic sheet metal brake – JINDONGCHENG Detail:
JDC BEND™ 650E Magnetic sheet metal brake
Product image is only a representation, actual product appearance may differ slightly
JDC 1250E High performance electromagnetic sheet metal folder Specifications
| Nominal capacity | 650 mm x 1.6 mm (2ft x 16g) |
| 25.5”(2-foot) length with a maximum capacity of 16 gauge mild steel. | |
| Clamping force (with standard full-length clampbar) | 3Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake. |
| Recommended for | HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more. |
| Eletrical Supply: | 1 phase, 220/240 V ac and will work at virtually any site. |
| Nominal current: | 8 Amp |
| Duty cycle: | 30% |
| Box Depth | Unlimited |
| Bend Angle | 0-180° |
| Max. Clamping Bar Lift | Unlimited |
| Max. Capacity with Extension | 18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel |
| Max. Capacity without Extension | 16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel |
| Thermal Cut-Out | 158°F (70°C) |
| Shipping dimensions | 0.88m x 0.38m x 0.32m = 0.1m3 |
| GW/NW | 86kg/72kg |
| Blade gap adjustment | Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses. |
| adjustable back gauges | Comes with product supports and adjustable back gauges for production runs. |
| Scaled stroke angle control | lets you deliver repeatable bends time after time. |
| Notes | Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On. |
| Easy operation | 1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend. |
| open-ended design | 1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake.
2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn’t reliant on conventional finger depths. |
| Standard accessories | include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars. |
| Optional accessories | available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly |
| Special tooling | Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling |
| Operator Safety | Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs. |
JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)
| MATERIAL (yield/ult. stress) | THICKNESS | LIP WIDTH (minimum) | BEND RADIUS (typical) |
| Mild Steel (250/320 MPa) |
1.6 mm | 30 mm* | 3.5 mm |
| 1.2 mm | 15 mm | 2.2 mm | |
| 1.0 mm | 10 mm | 1.5 mm | |
| Aluminium Grade 5005 H34 (140.160 MPa) |
1.6 mm | 30 mm* | 1.8 mm |
| 1.2 mm | 15 mm | 1.2 mm | |
| 1.0 mm | 10 mm | 1.0 mm | |
| Stainless Steel Grades 304, 316 (210/600 MPa) |
1.0 mm | 30 mm* | 3.5 mm |
| 0.9 mm | 15 mm | 3.0 mm | |
| 0.8 mm | 10 mm | 1.8 mm |
With standard bending-beam extension fitted
For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.
1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com
specifications subject to change without notice.
Every JDC BEND modle have in stock , We can arrange shipping to you ASAP
Product detail pictures:
Related Product Guide:
JackQuest: The Tale of the Sword Review | TheXboxHub JackQuest: The Tale of the Sword Review | 48 Box And Pan Brake
Me & My Car: 1951 Ford tractor mostly just needed paint job | Brake Sheet Metal
We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for 2017 Latest Design Automatic Press Brake - 650E Magnetic sheet metal brake – JINDONGCHENG , The product will supply to all over the world, such as: Oman , Argentina , Malawi , Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.
By Ann
from Sudan
- 2015.05.15 10:52
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Laurel
from London
- 2015.12.22 12:52
Write your message here and send it to us
Products categories
-
Factory directly Manual Iron Bending Machine - ...
-
OEM/ODM China Small Metal Shaper - 2000E Power...
-
Cheapest Factory Oem Magnetic Sheet Metal Brake...
-
Factory directly Ironing Machine - Manufacture...
-
Special Design for Conduit Bending - 320E Magn...
-
Best-Selling Electra Brake Eb-1250 - Factory d...
