18 Years Factory Bender - 2000E Magnetic sheet metal brake – JINDONGCHENG

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for 48 Finger Brake , Box Brake , Box And Pan Sheet Metal Brake , We take quality as the foundation of our success. Thus, we focus on the manufacture of the best quality products. A strict quality management system has been created to ensure the quality of the products.
18 Years Factory Bender - 2000E Magnetic sheet metal brake – JINDONGCHENG Detail:

JDC BEND™ 2000E Magnetic sheet metal brake

Product image is only a representation, actual product appearance may differ slightly

JDC 2000E High performance electromagnetic sheet metal folder Specifications

Nominal capacity 2000mm x 1.6 mm (6ft x 16g)
78” (6-foot) length with a maximum capacity of 16 gauge mild steel.
Clamping force (with standard full-length clampbar) 9Tons  is consistent across the entire beam, allowing for crisp bends even
in the middle of the brake.
Recommended for HVAC shops,Tech schools, industrial art shops, and general sheet metal
fabrication shops.

Making enclosed boxes, triangles, alternate bends on varying planes, and
round items such as scrolling applications.

Bending a variety of materials, including sheets of mild steel, stainless steel,
aluminum, coated materials, heated plastics,and more.
Eletrical Supply: 1 phase, 220/240 V ac and will work at virtually any site.
Nominal current: 15 Amp
Duty cycle: 30%
Box Depth Unlimited
Bend Angle 0-180°
Max. Clamping Bar Lift Unlimited
Max. Capacity with Extension 18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension 16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out 158°F (70°C)
Shipping dimensions 2.2m x 0.33m x 0.32m = 0.24m3 
GW/NW 280kg/250kg
Blade gap adjustment Blade gap adjustment on the clamping bars lets you work with sheet metal
of different thicknesses.
adjustable back gauges Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control lets you deliver repeatable bends time after time.
Notes Capacities can change depending on set up leaf extension. Rule of thumb for
mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner,
extension On.
Easy operation 1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps your
fingers safely out of the machine and you to reposition the material.

4. Lift the the bottom bending leaf to complete the bend and repositioned ready
for another bend.
open-ended design 1. allows you to create fully enclosed ducts and shapes impossible to make with
a traditional box and pan brake.                                                                                                                         
2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to
almost any depth,since it isn’t reliant on conventional finger depths.
Standard accessories include a storage tray, adjustable backstops, A full-length clamp-bar,and a
complete set of short-length clamp-bars.
Optional accessories  available for these models include a narrow clampbar, a slotted clampbar for
forming shallow boxes more quickly
Special tooling  Special tooling can be quickly improvised from pieces of steel to help fold-up
difficult shapes, and for production work the standard clampbars can be replaced
by specialised tooling
Operator Safety Operator Safety is enhanced by a two-handed electrical interlock that ensures a
safe pre-clamping force is applied before full clamping occurs.

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress) THICKNESS LIP WIDTH (minimum) BEND RADIUS (typical)
Mild Steel
(250/320 MPa)
1.6 mm 30 mm* 3.5 mm
1.2 mm 15 mm 2.2 mm
1.0 mm 10 mm 1.5 mm
Aluminium
Grade 5005 H34
(140.160 MPa)
1.6 mm 30 mm* 1.8 mm
1.2 mm 15 mm 1.2 mm
1.0 mm 10 mm 1.0 mm
Stainless Steel
Grades 304, 316
(210/600 MPa)
1.0 mm 30 mm* 3.5 mm
0.9 mm 15 mm 3.0 mm
0.8 mm 10 mm 1.8 mm

With standard bending-beam extension fitted

For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.

1-year parts warranty as well as lifetime technical support by phone or email jdcbend@gmail.com

specifications subject to change without notice.

Every JDC BEND modle have in stock , We can arrange shipping  to you ASAP 


Product detail pictures:

18 Years Factory Bender -
 2000E Magnetic sheet metal brake – JINDONGCHENG detail pictures


Related Product Guide:
What’s in LKQ Corporation (LKQ) After Today’s Significant Decline? | Baileigh Tools
Qatar Airways: AI water cart brake failed, hit our plane at Kolkata Airport, says Qatar Airways | India Business News | Portable Siding Brake

We offer great strength in quality and development,merchandising,sales and marketing and operation for 18 Years Factory Bender - 2000E Magnetic sheet metal brake – JINDONGCHENG , The product will supply to all over the world, such as: Guatemala , Atlanta , Austria , We've got constructed strong and long co-operation relationship with an enormous quantity of companies within this business overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. In depth Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Portugal for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
  • The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Roxanne from French - 2016.06.25 12:48
    This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
    5 Stars By Julia from Accra - 2016.06.22 12:49
    Write your message here and send it to us
    WhatsApp Online Chat !